Mapping NAT Addresses to Virtual IP Addresses

After you create a virtual IP address, you can map NHR NAT addresses to it. You can assign each virtual IP address one NAT address from each NHR.

To map a new NAT address to a virtual IP

1.	Select LinkProof > Mapped IP Table. The Mapped IPs Table pane is displayed.

2.	Click Create. The Mapped IPs Table Create pane is displayed.

3.	Configure the parameters; and then, click Set.

 

Table 24: Mapped IPs Table Parameters

Parameter	Description
Virtual IP Address	The virtual IP address to which to map the NAT address.
Next Hop Router	The IP address of the NHR to map to the virtual IP address.
Virtual NAT Address	The NAT address of the next hop router.