Configuring an FTP Interface for Management

You can configure the LinkProof device to enable users to connect to the device using FTP and transfer files to/from the device flash memory.

Note	To access the device via an FTP service, the FTP server must be enabled.

To configure an FTP interface for management

1.	Select Services > Management Interfaces > FTP Server. The FTP Server Parameters pane is displayed.

2.	Configure the parameters; and then, click Set.

 

Table 45: FTP Server Parameters

Parameter	Description
FTP Server Port	Specifies the application port to access the FTP server on the device. Default: 21
FTP Server Status	Specifies the status of the FTP server on the device. Values: enable, disable Default: disable