Bridge Operating Parameters

To view and configure bridge operating parameters

1.	Select Bridge > Operating Parameters. The Bridge Operating Parameters pane is displayed, with the following read-only parameters:

—	Bridge Address — The MAC Address used by the device

—	Bridge Type — The types of bridging the device can perform

2.	Configure the parameters; and then, click Set.

 

Table 18: Query Filters Table Parameters

Parameter	Description
Forwarding Table Aging Time	The time, in seconds, the LinkProof device keeps learned entries in the Forwarding Table before deleting them. The counter resets each time the entry is used. Values: 10 – 1,000,000 Default: 3600
Delete entries when port goes down	Values: enable, disable Default: enable