CLI Traps

To send traps by CLI, Telnet, and SSH

Use the command manage terminal traps-outputs set-on. For console only, use the command manage terminal traps-outputs set normal.

When connected to any Radware product through a serial cable, the device generates traps when events occur. For example, if a next-hop router fails, LinkProof generates the following error message:

10-01-2007 08:35:42 WARNING NextHopRouter 10.10.10.10 Is Not Responding to Ping.

A device can send traps to all CLI users This option enables you to configure whether the device sends traps only to the serial terminal or also to SSH and Telnet clients.