Interface Numbering Conventions and Parameters

The following table describes the physical ports on the platforms that support LinkProof.

 

Table 7: Interface Numbering Conventions

Physical Interface Type	OnDemand Switch VL Port Index Range1	OnDemand Switch 2 Port Index Rangei	OnDemand Switch 3 Port Index Rangei
RJ-45 port for management	G6 / MNG12	MNG 1 – 23	MNG 1 – 2iii
GbE RJ‑45 ports	G1 – G54	G1 – G125	G1 – G8v
SFP GbE ports	G7 – 8v		G9 – G12v
Dual (SFP or RJ-45) GbE ports6		G13 – 16v
10GbE XFP ports			XG-1 – XG-4v

---

1

The value is case-sensitive using CLI.

2

Must be configured manually by means of the Startup Configuration Menu.     

3

For management only.

4

For traffic. The port that is labeled on the platform G6 / MNG1 is configured for management.

5

For traffic or management.

6

Only one side of a dual port can be active at the same time.