IP Router Operating Parameters

To configure IP router parameters

1.	Select Router > IP Router > Operating Parameters. The IP Router Parameters pane is displayed.

2.	Configure the parameters; and then, click Set.

 

Table 62: IP Router Parameters

Parameter	Description
Inactive ARP Timeout	The maximum time, in seconds, that can pass between ARP requests for an entry in the ARP table. After this period, the entry is deleted from the table.
ARP Proxy	Specifies whether the device responds to ARP requests for nodes located on a different direct sub-net. The device responds with its own MAC address. Values: • enable — The device responds to all ARP requests. • disable — The device responds only to ARP requests for its own IP addresses. Default: disable
ICMP Error Messages	Specifies whether ICMP error messages are generated. Values: enable, disable Default: enable
Advanced Fast Forwarding Status	Specifies whether the IP Fast Forward Table is used (enabled). When enabled, the table holds MAC-address information of servers only (pre-defined in the LinkProof farms) and not clients. Values: Enable, Disable Default: Disable