Downloading a Configuration File

Note	If you are downloading a configuration file using Web Based Management, you cannot download to a device configured to use only SNMPv3.

To download a configuration file

1.	Select File > Configuration > Receive from Device. The Download Configuration File pane is displayed.

2.	From the Configuration Type drop-down list, select one of the following:

—	Regular — You receive the device configuration file.

—

Backup (Active-Backup) — You receive the device configuration file created for the backup device — to support configuration synchronization in an Active-Backup topology. You upload this configuration to the backup device. To enable the device to create such a configuration, you need to specify the IP address for the same interface on the backup device for each IP interface that you configured on this device (Router > IP Router > Interface Parameters > Create > Peer Address).

3.	If you want the file to include private keys, select the Include Private Keys checkbox.

4.	Click Set. The Opening DeviceConfigurationFile<yyyy-MM-dd-hh-mm-ss> dialog box is displayed.

5.	Configure the file location and name as required.

6.

Click OK.