Device Information You can view information on your LinkProof platform and software. Note Please quote this information when you seek assistance from Radware Technical Support. To view device information Select Device > Device Information. The Device Information pane is displayed. Table 13: Device Information Parameters Parameter Description Platform The platform type. Ports The quantity and types of physical ports on the platform. Hardware Version The hardware version. Software Version The LinkProof software version. Build The timestamp and the build number of the software. Version State The state of this software version. Values: Open, Closed ApSolute OS The versions of Bandwidth Management and Application Security modules for this software. Network Driver The version of network driver. Active Boot The time, in days, since the active boot commenced. Secondary Boot The time, in days, since the secondary (redundant) boot commenced. RAM Size (MB) The amount of RAM, in megabytes. CM Flash Size (MB) The size, in megabytes, of the CompactFlash. Flash Size (MB) The size, in megabytes, of the flash (permanent) memory. Hard Disk(s) The number of hard disks on the device. Serial Number The serial number of the device. System Up Time The elapsed time since the last reboot. Base MAC Address The MAC address of the first physical port on the device. CPUs Number The number of CPUs on the platform. Cores Number The total number of cores on the platform. Power Supply Status Values: • Single Power Supply OK • Dual Power Supply OK • One Power Supply Failed