DNS-Client Utility You can configure LinkProof to operate as a DNS client. When the DNS-client feature is not used, IP addresses cannot be resolved. When the DNS-client feature is enabled, IP addresses can be resolved in the following ways: Using the specified DNS servers. The DNS client sends queries on IP addresses of a hostname to the DNS servers. Using the predefined static table, which includes hostnames and IP addresses. To specify a primary and secondary DNS server 1. Select Services > DNS. The DNS Client Parameters pane is displayed. 2. Configure the parameters; and then, click Set. Table 34: DNS Client Parameters Parameter Description Primary DNS Server The IP address of the primary DNS server. Alternate DNS Server The IP address of the alternate DNS server. To configure an entry in the static DNS table 1. Select Services > DNS. The DNS Client Parameters pane is displayed. 2. Click Create. The Static DNS Table Create pane is displayed. 3. Configure the parameters; and then, click Set. Table 35: DNS Client Parameters Parameter Description Host Name The domain name for the specified IP address. IP Address The IP address for the specified domain name.
To